8800FR Epoxy Resin
DESCRIPTION:
The 8800FR Epoxy Resin is a UV resistant epoxy resin system.
Test Item | Standard | Units | Result | Note | |
Non-volatile-matter Content | GB/T1725 | % | 99.75% | ||
Tensile Properties | Tensile strength | ISO 527-3 | Mpa | 49.8 | |
Elongation at break | % | 2 | |||
Gloss | GB/T 9754 | / | 40.2 | Gloss at 60° | |
Flexibility | 10mm | GB/T 1731 | / | No cracking and peeling on the paint film | |
Resistance to Abrasion | Load 1kg/1000r | GB/T 1768 | mg | 52 | |
Impact Resistance | Impact Height 1125px | GB/T 1732 | / | No cracking and peeling on the paint film | |
Abrasion Resistance | ASTM D968 | L | >300 | ||
Water Resistance | 120h | GB/T 1733 | / | No loss of light, discoloration, foaming, wrinkling, shedding and rust on the film | |
Oil Resistance | 90# gasoline 4h | ISO 2812-1 | / | No blistering | |
UV Resistance | Value of gloss change | GB/T 23987 | / | -39.1 | Test Duration 720h |
Color difference | / | 5.91 | |||
Salt Spray Test | 1000h | ISO 9227 | / | No corrosion, no change on the surface | |
Acid and alkali Resistance | 10% H2SO4 240h | ISO 2812-1 | / | No blistering | |
5% NaOH 168h | |||||
Resistance to heat and humidity | 47℃,humidity 96%RH | GB/T 1740 | / | Rusting 0 S(0) Blistering 0 S(0) Cracking 0 S(0) Slight Discoloration |
Standard No. | Resin No. | Hardener No. |
CO-8800FR | 8800FR-JC | 8800FR-GH |
Mixing Ratio by weight: 100 Parts resin to 25 Parts opaque hardener
100 Parts resin to 15 Parts transparent hardener
Mixing Ratio by volume: Deprecated
DISCLAIMER:
The information provided herein is given to the best of our knowledge, however, it is given without any warranty expressed or implied and MID assumes no liability in connection with any use of this information. The specification is subject to change without notice. All advice given and products sold are subject to MID’s terms and conditions of sale. Consult QUALITY CONTROL REPORT available for each batch for actual results. Consult MATERIAL SAFETY DATA SHEET for handling of material.